Omega OBO758XB, Инструкция по эксплуатации

Страница: 8 / 25

5
Installation Instructions
The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the
ambient temperature of the room it is located in, during periods of use. The power supply to the
appliance must be cut off before any adjustments or maintenance work is done on it.
Preparation for Installation and Use
WARNING : This appliance must be installed by an authorised service person or qualified technician,
according to the instructions in this guide and in compliance with the current local regulations.
• Incorrect installation may cause harm and damage, for which the manufacturer accepts no
responsibility, and the warranty will not be valid.
• Prior to installation, ensure that the local distribution conditions (electricity voltage and
frequency) and the adjustments of the appliance are compatible. The adjustment conditions for
this appliance are stated on the label.
• The laws, ordinances, directives and standards in force in the country of use are to be followed
(safety regulations, proper recycling in accordance with the regulations, etc.).
Instructions for the Installer
• Insert the appliance into the compartment; open the oven door and fasten the oven to the
cabinet using the four screws “A”, remembering to place the special spacers provided between
the hole and the screw itself.