![background image](http://html1.mh-extra.com/html/omega/obfd127b/obfd127b_instruction-manual_4028554008.webp)
8
Installation
Levelling the unit
To do this adjust the two levelling feet at front of the unit. If the unit is not
level, the doors and magnetic seal alignment will not be covered properly.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the
rating plate of the appliance.
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight
etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the
appliance is positioned below an overhanging wall unit, the minimum distance between the top of the
cabinet and the wall unit must be at least 100 mm. Ideally, however, the appliance should not be positioned below
overhanging wall units. Accurate leveling is ensured by one or more adjustable feet at the base of the cabinet.
Warning!
It must be possible to disconnect the appliance from the mains power supply; the plug must
therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic
power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in
compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed.
Содержание OBFD127B
Страница 1: ...Instruction Manual Bar Fridge OBFD127B OBFD127X...
Страница 12: ...12 Data Label and Circuit Diagram...
Страница 15: ...1...