Omega MWTC-REC6, Руководство пользователя, Страница: 5 / 16

2
MWTC-REC6/UWTC-REC6
2. Click “Next” to continue with the installation.
3. If you accept the terms of the License Agreement, select “I accept the terms in
the license agreement” and click “Next.”
4. Click “Install” to begin installing the software.
5. Once the program has been installed, Click “Finish” to close the installation
wizard screen.
Section 4 – Receiver Setup & Output Scaling
You must complete the software installation procedure in
Section 3 before connecting and attempting to setup or
operate your transceiver
4.1 Power/Analog Output Connection
Your wireless transceiver is supplied with an integral 4-conductor cable. DC
power must be applied during the setup and scaling process.
Fig 4-1. Power/Analog Output Connection
4.2 Setup/Programming Cable Connection
Your transceiver requires you to perform setup and scaling prior to placing into
operation. Setup/Programming Cable and Software Model REC6-PC (sold
separately) are required to complete this process.
NOTE:
ENGI
NEE
RING, I
NC.
O M
EG
A
SHIELD
WHITE
BLACK
RED
GREEN
RED: + POWER
BLACK: - POWER
WHITE: + ANALOG OUTPUT
GREEN: - ANALOG OUTPUT
R