Omega LVF-210A Series, Руководство пользователя, Страница: 5 / 22

5
SPECIFICATIONS (ultrasonic) Step Two
Ultrasonic Switch (LVU ‐ 150 series): The Ultrasonic level switch generates a 1.5 MHz ultrasonic wave from a
miniature piezoelectric transducer located on one side of the gap in its sensing tip. Another piezo transducer
located on the other side of the gap acts as a microphone, picking up the sound. When liquid enters the gap in
the sensing tip, the audio level changes.
LVU ‐ 152 ‐ R & LVU ‐ 153 ‐ R LVU ‐ 150 ‐ R & LVU ‐ 151 ‐ R
LVU ‐ 152 ‐ G ‐ R & LVU ‐ 153 ‐ G ‐ R LVU ‐ 150 ‐ G ‐ R & LVU ‐ 151 ‐ G ‐ R
The sensor should be installed so that the liquid will drip out of the gap when the sensor becomes dry.
LVU ‐ 150 Series Specifications:
Sensor material: ‐ 150/ ‐ 152: PP
‐ 151/ ‐ 153: PFA
Cable jacket mat’l: ‐ 150/ ‐ 152: PP
‐ 151/ ‐ 153: PFA
Configurations:
Part
Number
Length
Material
(body)
Material
(cable)
Cable
Length
LVU ‐ 150 ‐ R Short (3”) Polypropylene Polypropylene 10’
LVU ‐ 150 ‐ G ‐ R Short (3”) Polypropylene Polypropylene 10’
LVU ‐ 151 ‐ R Short (3”) PFA FEP 10’
LVU ‐ 151 ‐ G ‐ R Short (3”) PFA FEP 10’
LVU ‐ 152 ‐ R Long (4.5”) Polypropylene Polypropylene 10’
LVU ‐ 152 ‐ G ‐ R Long (4.5”) Polypropylene Polypropylene 10’
LVU ‐ 153 ‐ R Long (4.5”) PFA FEP 10’
LVU ‐ 153 ‐ G ‐ R Long (4.5”) PFA FEP 10’
Note: all ultrasonic level switches are available with longer lengths cable of 25’ and 50’. For 25’ of cable, add
( ‐ 25) to the end of the part number and for 50’ of cable, add ( ‐ 50) to the end of the part number. Example,
LVU ‐ 150 ‐ R ‐ 25 will have 25’ of cable.