6
11
Note: Unplug any thermocouple probes from the
thermocouple input sockets before making any other
types of measurements.
Voltage Measurements
1. Connect the red test lead to the "V
" jack and the black test
lead to the "COM" jack of the multimeter.
2. For DC measurement, set the Function switch
" V " position. For AC measurement, set the
Function switch " V " position.
3. Connect the other end of the test leads to the device or circuit
being measured.
Resistance & Continuity Measurements
1. Set the Function switch to the resistance position.
2. Remove power from the device or circuit under test.
3. Connect the test lead to the "V
" & "COM" jacks.
4. The beeper sounds once, if the resistance being measured is
less than 30 Ohms.
Current Measurements
1. Set the Function switch anywhere from 430µA to 10A depending
on the range.
2. In the 10A position, connect test leads to "A" and "COM" jacks.
In lower ranges, connect test leads to "mA µA" & "COM" jacks.
3. For AC measurement, press the
button, and an AC icon will
appear on the display.
4. Connect the multimeter in Series with the circuit being measured.
CONTINUITY
Audible indication: <30
Ω
Overload protection: 500VDC or AC rms
DIODE TEST
Accuracy: ±(3.0%rdg + 3dgts)
Resolution: 100µV
Test current: 1.0 ± 0.6mA
Test voltage: <3.5V
LOGIC TEST
Threshold: Logic Hi( ) (2.8 ± 0.8V)
Logic Lo( ) (0.8 ± 0.5V)
Frequency response: 20MHz
Detectable pulse width: 25nS
Pulse limits: >30% & <70% duty
Overload protection: 500VDC or AC rms
FREQUENCY
Ranges: 100Hz,1000Hz,10KHz,100KHz,500KHz
Resolution: 0.01Hz (under 100Hz)
Accuracy: ±(0.1% rdg + 3dgts)
Sensitivity: 1Vrms min
Overload protection: 500VDC or AC rms
CAPACITANCE
Ranges: 4.3nF,43nF,430nF,4.3µF,430µF
Resolution: 0.1pF
Accuracy: ±(5.0%rdg + 10dgts)
Test frequency: 4.3nF,43nF ranges 1KHz
430nF,4.3µF ranges 270Hz
430µF range 27Hz
INDUCTANCE
Ranges: 4.3mH,43mH,430mH,4.3H,43H
Resolution: 1µH
Accuracy: ±(5.0%rdg + 20dgts) on 4.3mH range
±(5.0%rdg + 10dgts) on 43mH to 43H ranges
Test frequency: 4.3mH,43mH ranges 1KHz
430mH,4.3H ranges 270Hz
43H range 27Hz
Test conditions: quality factor > 5 in 270Hz
LASER SIGHTING
Laser sighting: 12 point Laser circle
Wavelength(Color): 650-670nm(RED)
Operating distance: 2 to 25 feet
Maximum Optical Power output: <5mW at 75°F ambient
temperature Class IIIa Laser Product
Safety Classification: Class 3A
FDA Classification: Complies with 21 CFR Chapter 1,
Subchapter J
Содержание HHM290
Страница 1: ......