![background image](http://html1.mh-extra.com/html/omega/hhf141-series/hhf141-series_user-manual_4152226018.webp)
M4745/1222
Page 18 of 24
APPENDIX F – RS232 COMMUNICATIONS (IF EQUIPPED)
If the instrument is equipped with the RS232 Communications option, there will
be a three-pin male connector on the bottom of the instrument. Also, an RS232
cable will be included with the instrument. This cable will have a three-pin
female connector on one end and a DB9 Female connector on the other end.
RS232 Data Output – Instructions for Use
STEP 1: Connect the RS232 cable (included) to the female connector on the
bottom of your instrument. Connect the other end to an RS232 port
on your computer.
STEP 3: Turn the Instrument ON.
STEP 4: Verify that the Instrument has been set up as a RS232 Serial Port
with a unique COM port number. (You only need to do this once).
For Windows users, open the Windows Device Manager (found in
Control Panel) and verify that a serial port exists.
You are now ready to capture the data being measured by your
instrument.
Please refer to
Appendix G – Viewing and Capturing Data
for
further instructions.