GB
14
9.0 Memory mode - calling up the
measuring results
Press the
[MEM/SET]
button when in time
display mode in order to be able to read
off the saved temperature measurement
readings. If no measurement reading has
taken place, the display will appear as shown
in illustration fig. D.
If temperature measurements have taken
place, then these will be displayed in turn by
each successive pressing of the
[MEM/SET]
button (see fig. E).
The last 20 temperature values measured
over the past 20 days are saved together with
the date and time. After pressing the button
for the last time, the display will jump back
after about 4 seconds to the time display
mode.
MEMORY MODE
D
E
2634-09DST_M_GB_GebrAnw_Stirn_Ohrthermo_2.indd 14
27.04.09 09:11
