Ensure the voltage and frequency of the p ower being correspond s to
t hose on the rating plate. Only in sert the plug into an electrica l socke t which is earthed
prop erly. If the electrical socket t o which the a ppliance must be connected is not
appr opriate for the plug , replace the socket, rather than using a a daptors or the like as
t hey could cause ove rheating an d burns.
Plea se look at th e rating label to know the rat ing voltage and connect t he dishwasher to the app ropriate power supply.
Use the required fuse 10 amp , time delay fuse or c ircui t breaker recommended and provide separate circuit servi ng
only this appliance.
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of
electric shock by providing a path of least resistance for the electric current. This appliance is equipped with
a cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an
appropriate outlet that is installed and earthed in accordance with all local standards and requirements.
For personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING
CONNECTION FROM THE POWER CORD.
14
for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE
FROM THE POWER CORD.
EARTHING
CONNECTION
Improper connection of the equipment earthing conductor can result in the risk of an
electric shock.
Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed.
Do not modify the plug provided with the appliance. If the plug does not fit properly to the
outlet, please have a qualified electrician to install a proper outlet.
and the sides, along t he adjacent cabi nets or wall. The dishwasher is equipped w ith water supply
Position the applianc e in the desir ed location. The back should rest against the wall behind it,
and drain hoses t hat can b e positi oned to the right or the left to facilitate proper installation.
Connect the cold water supply hose to a thr eaded 3/4(inch) conn ector and make sure
that it is fastened tightly in place. If the water pipes are n ew or ha ve not be en used for
an extended period o f time, let the water ru n to make sure that the water is clear and
free of impurities. If this p recaution is n ot taken , there is a ris k that the water in let can
get blocked and damage t he appliance .
The water supply to the appliance can a lso be connected to the house hot water line
(centralized system, heating system),as lon g as it does not exceed a temperature of
60 C. In this case, the wash cycle time will be shortened by about 15 minutes and the
wash efficiency slightly red uced. The connection must be made to the hot water line
following the same procedures as those for the conn ection to the cold water line.
In or der to avoid that there is more water staying in the inlet hose, please close
the hydrant after using.(Not applicable to appliances without aqua-stop.)
