Omega DRST-FR, Руководство пользователя

Страница: 4 / 20

Warning
4
WARNING
This device is designed for connection to hazardous electric voltages.
Ignoring this warning can result in severe personal injury or mechanical
damage. To avoid the risk of electric shock and fire, the safety instructions of
this manual must be observed and the guidelines followed. The specifications
must not be exceeded, and the device must only be applied as described
in the following. Prior to the commissioning of the device, this manual
must be examined carefully. Only qualified personnel (technicians) should
install this device. If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
GENERAL
WARNING
Until the device is fixed, do not connect hazardous voltages to the device.
The following operations should only be carried out on a disconnected
device and under ESD safe conditions:
• Dismantlement of the device for setting of DIP-switches
and jumpers.
• General mounting, connection and disconnection of wires.
Troubleshooting the device.
Repair of the device and replacement of circuit breakers must be done by
Omega A/S only.
HAZARD OUS
VOLTAGE
1
WARNING
To keep the safety distances, the device must neither be connected to
hazardous nor non-hazardous voltages on the same device’s relay contacts.
DRST-FR must be mounted on DIN rail according to DIN 46277. The
communication connector of DRST-FR is connected to the input terminals on
which dangerous voltages can occur, and it must only be connected to the
programming unit Loop Link by way of the enclosed cable.
INSTALLATION