Model 1200, 1202, 1203 & 1205
Operation Settings
Option
Display
Display
Function
123.4
At normal display,
Press & Hold
"
ZERO
" for more than 5 sec.
Cont.
Holding
_
Release
- 1 -
_
Cont
Continuous Reading (Cont) & Peak and Hold (hold)
_
As display switches between "Cont" and "hold"
Cont.
Holding
_
hold
Press "
ZERO
" to select.
_
Release
- 2 -
_
Aon
Always On (Aon) & Auto Shut-Off (Aoff)
_
As display switches between "Cont" and "hold",
_
Aoff
Press "
ZERO
" to select.
Cont.
Holding
_
_
_
180
If "Aoff" is selected, display will show shut-off time in seconds.
_
Press "
ON/OFF
" or "
ZERO
" to increase or decrease seconds.
_
Release
- 3 -
_
PSI
Pressure Unit Setting
_
Press "
ZERO
" to select.
_
Bar
_
Cont.
Holding
_
Kgf/cm
2
_
_
KPa
_
Release
- 4 -
_
330.0
Maximum Over Pressure Limit
_
Press "
ON/OFF
" or "
ZERO
" to increase or decrease.
Cont.
Holding
_
Release
- 5 -
_
-30.0
Minimum Under Pressure Limit
_
Press "
ON/OFF
" or "
ZERO
" to increase or decrease.
Cont.
Holding
_
END
If hold key continuously, the LCD will display "END". It won't go
_
back to normal display mode until the key is released.
Release
_
123.4
Normal display
Settings Glossary:
Continuous reading
: the gauge display constantly shows the current reading
Peak and Hold
: the gauge displays the maximum recorded pressure during a specified time period or session
Aon
: the gauge will be set to stay on for a maximum of 15 minutes
Aoff: the gauge will be set to stay on for only 3 minutes
Maximum Over Pressure Limit : the maximum amount of pressure the gauge will display beyond the gauge's specified
range
Minimum under pressure Limit : the lower limit that the gauge will display beyond zero
