![background image](http://html1.mh-extra.com/html/omega/cl110/cl110_user-manual_737622007.webp)
5
2. Calibrator Interface and Operation
Precision Loop
Calibrator
100%
25%
0%
MENU
EXIT
Source
0.00%
4.000mA
Simultaneous % Display
4mA = 0.00%
20mA = 100.00%
Cursor
100% Key: Sets Output to 20mA
25% Key: Steps 4, 8, 12, 16, 20mA
0% Key: Sets Output to 4mA
Digital Knob Sets Output Value
Press to Move Cursor
Menu
Press to Enter Setup Menu
Press Again to Exit
Step / Ramp Enable
Backlight
On / Off
Mode
Figure 1
Figure 1 is typical of the main display for all operating modes. It
shows the present measurement or output value. The individual
operating modes are described below.
Use the MENU/EXIT key to display the main menu described in
section 3 to select the primary operating mode of the calibrator or to
access the calibrator setup functions.
In output mode:
• Press the knob to move the decade cursor.
• Rotate the knob to increment or decrement the output in steps
indicated by the selected decade.
• Use the 3 percent keys to directly set the output to preset
values.
• Use the step/ramp key to select and stop these advanced
modes which are described in section 5.1.