manualshive.com logo in svg

Omega BB702, Руководство пользователя, Страница: 8 / 24

Поделиться
Скачать
Omega BB702 Скачать руководство пользователя страница 8

Figure 2.  Limitation of Maximum Setpoint Temperature at Elevated Ambient 

Temperature.

 

2.4 

Power Connection

Standard (115 VAC~, 50/60 Hz models)
The BB702 comes with a standard North American 3-prong AC power cord. Do 

not use any other power cord other than the one provided. This cord provides 

the proper grounding and has been safety tested by the proper safety agencies.
International (230 VAC~, 50/60 Hz models)
On 230 VAC~, 50/60Hz models a European style power cord with the proper 

color code and approvals is provided with stripped wire ends for connection 

to the proper connector used in your country or local area, this connector is not 

provided. 

•  Line voltage variations are not to exceed ±10% of the rated input voltage. 

•  Electrical connections and wiring should be performed only by suitably trained 

 personal. 

•  To shut down the unit in an emergency, the power cord can be disconnected from  

  the AC outlet on the rear of the unit.

BB702 Installation

2

2-2

29.4

32.2

35.0

37.8

40.6

43.3

46.2

420

400

380

360

340

320

215.6

204.4

193.3

182.2

171.1

160.0

AMBIENT TEMPERATURE (C)

MAXIMUM ALLO

W

ABLE

 T

ARGET PLA

TE TEMPERA

TURE (F)

MAXIMUM ALLO

W

ABLE

 T

ARGET PLA

TE TEMPERA

TURE (C)

AMBIENT TEMPERATURE (F)

85

95

90

100

105

110

115

OPERATING

REGION

CAUTION:

Содержание BB702

























Отзывы:

Нет отзывов