Omega BB-4A Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 24

Omega BB-4A Скачать руководство пользователя страница 5

Section 1 - Introduction

Your BB4A Blackbody Calibration Source has been designed for ease of use and

reliability whenever you have the need to test or calibrate non-contact infrared

temperature instruments. It is important that you read this manual completely

and follow all safety precautions before operating this instrument.

1.1 Precautions

• Follow all safety precautions and operating instructions outlined in this manual.

• Never leave your calibrator unattended when in use.

• Keep out of reach of all children.

• Remove the cavity wood shipping plug before use.

• Never touch the heater cavity when hot.

• Never place any object within 3 inches of the cavity opening when hot.

• Do not operate in flammable or explosive environments.

• Never operate with a power cord other than the one provided with your unit.

• Remove and or disconnect main power cord before attempting any

maintenance or fuse replacement.

• Do not connect and or operate this unit to a non-grounded, non-polarized

outlet or power source.

• Do not connect the serial port or reference probe port to equipment with

exposed, hazardous, live voltages.

• Protect from moisture and rain.

• The operator of this instrument is advised that if the equipment is used in

a manner not specified in this manual, the protection provided by the

equipment may be impaired.

There are no user serviceable parts inside your unit. Attempting to repair or service your

unit may void your warranty.

1.2

Safety Warnings and ICE Symbols

This device is marked with international safety and hazard symbols in

accordance with EN61010-1. It is important to read and follow all precautions

and instructions in this manual before operating or commissioning this device as

it contains important information relating to safety and EMC. Failure to follow

all safety precautions may result in injury and or damage to your calibrator.

Use of this device in a manner not specified by the manufacturer may impair

protection provided within the unit.
IEC symbols Description

BB-4A Blackbody Calibrator

1

1-1

Caution, hot surface

NOTE:

«
...
3
4
5
6
7
...
»

Содержание BB-4A

























Отзывы:

Нет отзывов