2
Installation
2-1
Section 2 - Installation
2.1 Unpacking
Remove the packing list and verify that you have received all your
equipment, including the following items:
• BB-2A Blackbody Calibration Source
• Dial Temp. Thermometer, Model H
• Users Manual
If you have any questions about the shipment, please call our Customer
Service Department at
1-800-622-2378 or 203-359-1660. We can also be reached on the
Internet at omega.com
e-mail: cservice@omega.com
When you receive the shipment, inspect the container and equipment
for any signs of damage. Note any evidence of rough handling in tran-
sit. Immediately report any damage to the shipping agent.
2.2 Mounting and Setup
Place the BB-2A Blackbody Reference on a sturdy surface in a vertical
position and allow space on all sides of the unit for ventilation.
Assemble the Dial Temperature thermometer by inserting the stem of
the thermometer into the large hole in the middle of the top surface
of the target plate. Make sure the rocker switch and the temperature
control knob is on the OFF position. (Rotate the knob counterclockwise
if necessary). Plug in the power cord into a convenient voltage outlet.
The BB-2A is designed to operate within an ambient temperature range
from 10°C to 35°C (50°F to 95°F).
N O T E
The carrier will not honor any damage claims unless all
shipping material is saved for inspection. After examining
and removing contents, save packing material and carton
in the event reshipment is necessary.