OPeRatIOn
Follow the vehicle manufacturers recommended removal and installation procedures for tire, wheel or hub.
After the tire/wheel assembly has been loosened from the hub or axle and is ready to be removed, position the tire
cart under the tire to be removed. Adjust cart position such that the tire/wheel assembly will balance between rollers
without falling.
Loading the tire cart
NEVER
load this device beyond rated capacity!
NEVER
use the Tire Cart as a wheel pulling device. Before trans-
porting wheel assembly, ensure that it is free from the hub or drum
assembly and balanced between the rollers
.
When the weight of the loosened tire and wheel assembly is supported
by the Tire Cart,
carefully
roll the cart away from the drum or axle.
Always
use
both hands
to control tire and Tire Cart!
transporting the Loaded tire cart
1. Ensure that tire is properly placed on the rollers.
2. When wheel assembly has cleared the hub or the axle, push or pull
to desired location. Walk slowly, exercize caution and look ahead to
avoid obstacles while using both hands to control the tire and the tire
cart.
3
RePLaceMent PaRtS
Not all components of the OmegaTire Cart are replacement items, but are illustrated as a convenient reference of
location and position in the assembly sequence. When ordering parts, give model number, parts number and parts
description. Call or write for current pricing: SFA Companies, Inc. 10939 N. Pomona Ave. Kansas City, MO 64153
E-mail: [email protected] Phone: (888) 332-6419 Fax: (816) 891-6599
1
6
6
4
3
2
5
Figure 2 - Parts Illustration for Tire Cart
Figure 1 - Always use both hands
Item
Part no.
description
Qty
1
92030-1
Handle Assembly
1
2
92030-2
Roller Assembly
2
3
92030-3
L Roller Frame
1
4
92030-4
R Roller Frame
1
5
92030-5
Wheel Assembly
2
6
92030-6
Frame Hardware Kit
1
!
!
!
!
