2
OIPM#49154-ATV2
Save these instructions.
For your safety, read, understand, and follow the information provided with and on this Lift.
The owner and operator of this equipment shall have an understanding of this Lift and safe operating procedures
before attempting to use. The owner and operator shall be aware that use and repair of this product may require
special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language
before use of this Lift is authorized. If any doubt exists as to the safe and proper use of this Lift, remove from
service immediately.
Inspect before each use.
Do not use if broken, bent, cracked or damaged parts are noted.
Any Lift that appears damaged in any way, or operates abnormally shall be removed from service immediately. If
the Lift has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly
upon it), immediately discontinue use until it has been checked by an Omega authorized service center. It is
recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manuals are
available from manufacturer (see Replacement Parts, page 5).
PRODUCT DESCRIPTION
Omega Motorcycle/ATV Lift is specifically designed to lift and support up to rated capacity loads consisting of a
single Motorcycle, ATV, Water Craft or Riding Lawn Mower whose frames are compatible with the lifting members of
the Lift. Incompatibility is evident when the loaded motorcycle, ATV, etc. wobbles, feels unstable, and/or does not
set securely on the lift pads. Tying down incompatible loads will not make the loads secure and may cause
unexpected loss of load resulting in personal injury and/or property damage. This Lift is NOT suitable for lifting,
leveling and/or positioning cars, trucks, SUV’s or conveyances other than those specifically listed and approved
above. This Lift is NOT suitable for lifting, leveling and/or positioning houses, construction trailers and dwellings in
general. This product does not contain independent lifting devices, but is designed to be permanently assembled.
Hydraulic unit is not to be used independently of the motorcycle lift.
SPECIFICATIONS
Base Size (LxW)
Model
Capacity
Min. Height
Max. Height
4 1/2"
16 1/2"
34 1/4" X 17 3/4"
1500 Lb
49154
hydraulic unit
handle
lift pads
height
locking/unlocking
lever
casters
Figure 1 - Model 49154 Nomenclature
release pedal
lift pedal
sleeve
oil filler
plug
KNOW YOUR LIFT
Press Height Locking Lever Forward
Against Hydraulic Unit to Engage
Locking Mechanism. Pull Lever Back
Over Lift Pedal To Disengage Locking
Mechanism
