Step 4:
Locate rear mounting position of the plastic
sockets by placing them on the slides and
extending them to the back of the cabinet.
Slides must be level and parallel with sides of
the cabinet. When positioned, fasten to the
back of the cabinet with 4 #6 x 1/2" Truss head
screws per each rear mounting socket.
Step 5:
Reinstall Pullout unit on the slides and make
sure it moves freely in and out. Mark the prop-
er location for the door.
Step 6:
Attach the four door mounting brackets to the
Pullout with one #10-32 x 5/8" Truss Head
Machine Screws for each bracket.
Figure 4
Figure 5
Form OME-058, 04/2009
©Omega National Products
Figure 6
Step 7:
Mount the door to the Pullout through at least
two of the brackets with #8 x 1/2" Washer
head screws provided (predrill if neccesary)
and check for correct position. Correct posi-
tion if neccesary and then fasten the door
through the other 2 brackets
Figure 7
Omega National Products
