Installation
OMG-ULTRA-485-PCI
Page
6
Physical Installation
The adapter can be installed in any 5V PCI expansion slot and contains several jumper straps for each port that must
be set for proper.
Do not install the Adapter in the machine until the software has been fully installed.
1.
Turn off PC power. Disconnect the power cord.
2.
Remove the PC case cover.
3.
Locate an available PCI slot and remove the blank metal slot cover.
4.
Gently insert the PCI adapter into the slot. Make sure that the adapter is seated properly.
5.
Replace the screw. (This is required to ensure FCC Part 15 compliance.)
6.
Replace the cover.
7.
Connect the power cord
Installation is finished.
