Quick Start for Windows 95
Omega Engineering
OMG-P232/P422
Page
ii
The next step is to place the Serial Utility Diskette (shipped with your
adapter) into a floppy drive (in the example below drive A:.)
Select the browse key and locate the \Windows\95\Inf sub-directory.
Click the “OK” command button and your installation is complete.
Changing settings from the Default
Now that the
OMG-P232/P422
has been added to the system using the
previous steps, the resources (i.e. I/O address and IRQ) can be changed
using the following steps:
1.)
Select the Control Panel folder and select the System icon.
2.)
Select the Device Manager tab and click on the ‘+’ symbol next to the
Ports (COM & LPT) selection. Choose the port that corresponds to
the
OMG-P232/P422
3.)
Click the Properties button and then select the Resources tab.
4.)
Select Basic Configuration 8, this will allow you to customize both
the IRQ and I/O settings.
5.)
If the message "This resource setting cannot be modified." is
displayed, make sure you have selected a Base Configuration which
allows this resource to be changed and that the ‘Use Automatic
Settings’ checkbox is not selected.
6.)
When the ‘OK’ button is pressed Windows 95 will automatically
update your settings. It will not be necessary to re-boot.
Refer to the Card Setup section for tips on installing the
OMG-
P232/P422
with DOS Card and Socket Services.
