RF
mini OMEGAMOUSE
®
User Manual
Thank you for selecting this product! Your RF
mini
OMEGAMOUSE
®
Optical Mouse uses a
newly developed RE wireless technology 27 MHz that replaces the traditional wired mouse.
PRODUCT FEATURES
1. Radio frequency 27 MHz, enjoy your wireless space.
2. OMEGAMOUSE
®
has 2561D code. There is no interference even when many mice are
being used at the same time.
3. The battery life is prolonged by automatic sleep mode.
SYSTEMS COMPATIBILITY
IBM PC and Wind98/Me/2000/XP/NT, Mac X.
No driver is needed.
TO INSTALL THE BATTERY
1. Press the button on the mouse's upper cover and pull the battery cover rearward.
2. Insert two AAA batteries according to the polarity marks on the battery grooves.
3. Pull the battery cover forward. The battery cover is locked successfully when you hear
a snapping sound.
RECEIVER INSTALLATION
1. If you use the PS/2 connector, please use the USB to PS/2 adaptor and connect with the
connector before the start-up of your computer.
2. For laptop use, you may connect the receiver directly.
3. If you use a desktop PC, we suggest you place the receiver on your working surface.
Press the top button on the mouse to open the upper cover
ID SETUP
I . Please move the mouse near the receiver.
2. Press the ID button on the receiver. The receiver's light RCV will begin to flash.
3. Press the ID button on the bottom of the mouse, on a hard surface. This will actuate the
mouse within 10 seconds. The receiver light will now flash rapidly; a few seconds later
the mouse will go "ON" which will show it is now successfully connected.
4. Working distance: within 1 to 2 meters (3.3 to 6.6 ft).
First press the ID
button on the receiver
Then press the ID button on the mouse
