manualshive.com logo in svg

Omega Engineering 100/200 Series, Руководство пользователя

Поделиться
Скачать
Omega Engineering 100/200 Series Скачать руководство пользователя страница 38

pg. 4,     OMB-DBK Basics 

02-19-02 

Daq Systems 

Expansion and Terminal Panel Connection DBKs 

The following DBKs offer provide various expansion and connection options.  The stackable 3-slot 
DBK10 low-profile enclosure can be used for up to three DBKs.  If a system has more than 3 DBKs, the 
10-slot DBK41 can be used.  Several DBK41s can be daisy-chained to accommodate many DBKs in one 
system.   

Expansion and Connection, General 

Product

 

Name/Description

 

I/O

 

Connectivity

 

DBK1  

16-Connector BNC Adapter Module 

16 connectors 

P1 

DBK10 

3-Slot Expansion Chassis 

3 cards 

P1, P2, or P3 

DBK11A 

Screw-Terminal Option Card (DB37-Screw Terminal Block) 

Component 

sockets 

P1 

DBK40 

BNC Interface 

18 connectors 

P1 or P3 

DBK41 

Analog Expansion Enclosure 

10 cards 

P1 or P2 

DBK60 

Expansion Chassis with Termination Panels 

3 cards 

P2 

 

Termination Panels, Connectivity for DaqBoard/260

 

Product

 

Name/Description

 

I/O

 

Connectivity

 

DBK601 Termination 

Panel 

- blank rear panel 

none 

none 

DBK602 

Termination Panel - BNC rear panel 

16 connectors 

BNC 

DBK603 

Termination Panel - Safety Jacks, single ended 

16 connectors 

Safety Jacks 

DBK604 

Termination Panel - Safety Jacks, differential 

8 differential (16) 

Safety Jacks 

DBK605 

Termination Panels  - Thermal Couple, differential panels; 

specify type: B, J, K, R, S, or T 

16 differential 

T/C Connectors 

DBK606 

Termination Panel – 3 Terminal Blocks; 16 connections per TB 

48 connectors Screw 

Terminal 

DBK607 

Termination Panel – strain relief clamp 

none 

none 

DBK608 

Termination Panel – 3 female DB37 connectors 

three DB37 

DB37 

 

Power Supply DBKs 

Power supply type DBKs are typically used in laboratory, automotive, and field applications.  Input power 
can come from any +10 to +20 VDC source, or from an AC source by using an appropriately rated AC-to-
DC adapter.  The DBK30A rechargeable power supply can power DBK modules where AC mains are not 
available (the DBK30A outputs 28 V for powering transducers).  For a large number of DBK cards, the 
DBK32A or DBK33 can be installed into an expansion slot.  The DBK33 is used when +5 V is required in 
addition to ±15 VDC.  The DBK34 provides a steady 12 or 24 VDC while working with vehicle electrical 
systems that may be turned on or off during testing. 
 

Power Supply 

Product

 

Name/Description

 

Power

 

DBK30A 

Rechargeable Battery/Excitation Module 

+12-14, 24-28 VDC (3.4 A-hr @ 14 VDC) 

DBK32A 

Auxiliary Power Supply Card 

±15 V @ 500 mA 

DBK33 

Triple-Output Power Supply Card 

±15 V @ 250 mA; +5 V @ 1 A 

DBK34 

Vehicle UPS Module 

12/24 VDC (5 A-hr @12 VDC) 

DBK34A 

UPS Battery Module 

12/24 VDC (5 A-hr @12 VDC) 

 

Tips on Setting up a Data Acquisition System 

A successful installation involves setting up equipment and setting software parameters.  In addition to this 
manual, you may need to consult your Daq device or LogBook user’s manual. 

DBKs should be configured before connections are made and power is applied.  This sequence can prevent 
equipment damage and will help ensure proper operation on startup.  Many DBKs have on-board jumpers 
and/or DIP switches that are used for setting channels and other variables.  You will need to refer to the 
individual DBK document modules to ensure that the DBKs are properly configured for you application.  

Prior to designing or setting up a custom data acquisition system, you should review the following tips.  
After reviewing the material you can write out the steps to setup a system that will best meet your specific 
application needs. 

Содержание 100/200 Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды