Omega Diamond The Red Ripper, Руководство по эксплуатации, безопасности и инструкции

Страница: 5 / 12

Page 5
Troubleshooting
Bit seems to be cutting slowly or not cutting at all?
Suggestions: The material being cut may have “flattened” or
“glazed” the diamond. Use a dressing stone or “green stone” to free the
diamond.
Router shuts off after a few minutes of use and/or fails to
turn on at all.
Suggestions: Check circuit breaker. If that is on and it still fails to
start, the motor may have overheated. Allow time to cool, then push in
Heat Overload button, you will then hear a dry click sound when router
has cooled down enough to restart.
Height adjusting hand wheel is difficult to turn.
Suggestions: Loosen the brake handle on the left side of the spindle
housing.