OMEGA ALTISE
TECHNICAL DETAILS
Model: OT1123B –Black Tower fan with remote control.
Power: 220-240V 50Hz, 90W.
Product weight: 5.8kg.
Product dimensions (WxDxH): 300x300x1124mm.
GENERAL TOWER FAN PARTS
GETTING STARTED
1. Carefully remove the appliance from the plastic bag and the carton, and unwind the cord to its full length.
2. Assemble the base of the fan onto the bottom of the body by placing the stand through the hole in the base (feet down) and
locking in place with the locking nut.
3. The remote control already contains a CR2032 3V battery. To replace, push clip at bottom of remote inwards & pull out
battery holder, replace battery and push holder back in. The range of the remote control is approximately 6m.
WARNING: This product contains a button battery inside. Keep batteries out of reach of children. Swallowing can lead to
serious injury in as little as 2 hours, or death due to chemical burns and potential perforation of the oesophagus. Take care
battery holder is secure and dispose of used batteries immediately and safely.
1) Remote control.
2) Main body.
3) Stand.
4) Glass base.
5) Locking nut.
6) Power cord & plug.
7) Aroma disk.
The display is set up so that the icons are derived from
the buttons above them. For example, the 3 modes are
Normal (no icon lit), Natural (palm tree icon lit) and
Sleep (Moon icon lit).
This appliance is supplied with
one Aroma disk with two
replacement fibre pads. To
use, place a fibre pad inside
the Aroma disk, and add a
little essential oil. Hang the
Aroma disk from the front of
any of the three fans. The fan
action will help distribute the
aroma around the room.
