Omega Altise OT102TW, Инструкция по эксплуатации, Страница: 3 / 6

3
1. Remove all items of packaging from the tower fan.
2. Pass the power cord through the middle of the two base pieces.
3. Position base piece onto the support posts of the other base piece to create the base assembly.
4. Turn the tower body upside down position the base assembly onto the pedestal tube. Ensure that the
pedestal tube is sitting flush in the base assembly.
5. Screw the base assembly onto the pedestal tube with the supplied screws.
6. Position the power cord into the provided cord track in the rear base.
7. Turn the tower fan back to an upright position. It is now ready for use.
Battery Installation
One CR2032 3V battery is provided with the remote control. Please insert the battery into the remote
control on the direction of the polarity. If you are not using the fan for a long period, please remove the
battery from the remote control.
Remote control panel
INSTALLATION INSTRUCTIONS
FAN OPERATION
ON
SPEED
MODE TIMER
SWING OFF