OMEGA ALTISE
INSTALLATION INSTRUCTIONS
Choose your location
•
If tipped more than 45°, allow the unit to set upright for at least 24 hours before starting up.
•
Place the unit on a firm, level surface in an area with at least 50cm of free space around it to allow for
proper air circulation.
•
Do not operate in close proximity to walls, curtains, or other objects that
may block air inlet and outlet. Keep the air inlet and outlet free of
obstacles.
•
Never install the unit where it could be subject to
：
I.
Heat sources such as radiators, heat registers, stoves or other products
that produce heat.
II.
Direct sunlight
III.
Mechanical vibration or shock
IV.
Excessive dust
V.
Lack of ventilation, such as cabinet or bookcase
VI.
Uneven surface
WARNING!
•
Install the unit in rooms which exceed 4 m².
•
Do not install the unit in a place where inflammable gas may leak.
ATTACH THE EXHAUST HOSE
The air conditioner requires being vented outside so that the exhaust air can escape the room which coming
from the appliance contains waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased efficiency, even worse shut down the unit
due to low backpressure.
Step 1: Connect the hose connector to one end of the exhaust hose.
11
