AOK 20SS - Installation and operating manual
3
Technical data
CALCULATION OF CAPACITY
For rough calculation of discharge capacity at certain pressure use following equation:
𝑄 = 63√∆𝑝
Example: if operating at 7barg;
𝑄 = 63√7 = 166,7
MATERIALS
Housing material
Stainless steel 1.4404
Fittings, Screws
Stainless steel 1.4404 / A4
Floater
Stainless steel 1.4404
Sealing
NBR
Operation pressure range
0 – 20 bar / 0 – 290 psi
Minimum reccomended operating pressure
1,5bar (g)
21,8 psi
Drain capacity (7 bar / 101 psi)
167 l/h
0,1 scfm
Drain capacity (16 bar / 235 psi)
252 l/h
0,15 scfm
Operating temperature range
1,5 – 65°C
35 - 149 °F
Operating media
Condensate (air, water, oil); Non-agressive
Inlet connection
G ½” (NPT on request)
Outlet connection
G ½” (NPT on request)
Reservoar volume
0,45 l
Mass
6,6 kg
Dimensions A x B x C [mm]
155 x 100 x 100
Valve type
Direct acting, Normally closed
Discharge orifice cross cection
1,8mm
0,0708 inch
