OMD Technology Instructions for Use of 5000w Tungsten
12
11. AFTER USE
1. Allow light to cool for no less than 5 minutes in the water.
2. Rinse in fresh water.
3. Dry light adequately before placing it back into the road case.
4. Insure that you fit the length of rubber supplied over the bulb before closing. This can
be found in the road case and prevents the bail arm from damaging the protective
glass.
Do not pack light head in roadcase if hot or warm. Burning hazards from the packing
material may result.
12. TRANSPORT
1. Ensure that light head is placed back into the supplied road case as it arrived. .
2. Ensure that all locking clips are in the lock-down (secured) position.
