7. Use and maintenance manual
B01.24 - B02.44
San Maurizio C.se - 16/12/2020
www.omcr.it
LIFTING BRACKET
ART. NUM.
NR. SCREWS
SCREWS DIN
912 CL. 8.8
CLAMPING COUPLE
[Nm]
B01.24.08000
5
M24
711
B01.24.12500
5
M36
2481
WARNING
3.3
B01.24. lifting brackets should be mounted on steel plates (minimun quality Fe510,
S355),
with
C11.20.2245 locating pins
. It is recommended to provide barriers to avoid the
wrong pins insertion
(see
Pic.1
).
WARNING
3.4
WARNING
Pic.1
DIE AXIS
DRILLING
(see Pic. 1.1)
LOCATING PIN
C11.20.2245 (2x)
SCREWS DIN 912 CL. 8.8
BARRIER TO AVOID
THE WRONG PINS INSERTION
PIN INSERTION DIRECTION
3.4.1 - APPLICATION ON FLAT SURFACE
LIFTING PIN B02.44.
At the moment of the use, check the correct screws clamping; in the following table are
written down screws and clamping couples for the fixing of the lifting brackets;
it is required
to use threadlocker LOCTITE 243 or lock washers
.
Absolutely ensure a minimum screws
clamping of 1 x Ø screw if you are screwing the bracket on steel (minimun quality Fe510,
S355). Example: for M36 screws use a minimum clamping of 36 mm.
The missing respect of the prescriptions included in this manual may cause the accidental fall of the load.
