7. Use and maintenance manual
B01.11
S. Maurizio C.se - 18/12/2020
www.omcr.it
OMCR CODE
NR. SCREWS
SCREWS DIN
912 CL. 8.8
CLAMPING COUPLE
[Nm]
B01.11.20
2
M10x30
50,01
B01.11.25
2
M12x40
87,28
B01.11.32
2
M16x45
210,8
B01.11.40
2
M20x60
411,9
B01.11.50
2
M24x70
711
B01.11.63
4
M20x90
411,9
The missing respect of the prescriptions included in this manual may cause the accidental fall of the load.
WARNING
During the operation of lifting / handling / overturning of the die, please respect the maxim
dimensions of the ropes written in the table to guarantee the correct operation of the stop
rope safety system (see
Pic.1
)
WARNING
3.3
OMCR CODE
Ø
max
B01.11.20
8
B01.11.25
10
B01.11.32
10
B01.11.40
12
B01.11.50
14
B01.11.63
16
Before each lifting / handling / overturning of the die, check that the chosen sling system
(rope/chain, hook, etc.) doesn’t present any defect or deformation to make it unsafe;
otherwise replace immediately the damaged parts
.
WARNING
3.4
Pic.1
WARNING
3.5
At the moment of the use, check the correct screws clamping and the use of screws with the
required lengths; in the following table are written down screws and clamping couples for the
fixing of the lifting brackets;
it is recommended to use threadlocker LOCTITE 243 or lock
washers
.
Absolutely ensure a minimum screws clamping of 1 x Ø screw. Lifting brackets
should be mounted on steel plates (minimun quality Fe510, S355).
Содержание B01.11
Страница 13: ......