Omcan VRD26, Инструкция по эксплуатации

Страница: 12 / 108

12
Installation
• Never place objects over the cooler. Consider that the cabinet’s structure has
been constructed mainly of laminated sheet metal and polyethylene foam that
may easily bend or deform when hit, and it may even deform over time due to
placement of TV, microwave oven and other objects.
• For adequate cooling, cooler separation on back and sides must be at a
minimum distance of 10cm (4”) with respect to walls or other nearby objects.
IMPORTANT: do not to use a cutter knife or blade for cooler handling.
Inappropriate use may scratch or cut off components.
ACCESSORY INSTALLATION
Before turning the cooler on or connecting to power supply, make sure you use the installation kit, such as wall
separators, level supports or other accessories. Depending on your cooler’s model, you may have some of the
following accessories:
Used to provide support and adequate inclination for door closure.
Some models have optional wheels for easy mobility inside the establishment. If this is the case,
wheels are factory-installed, and it is only necessary to remove transport pods.
This accessory is designed to provide adequate separation between cooler back and wall.
TOOLS TO BE USED