Omcan VP-NL-0004-SN Скачать руководство пользователя страница 5

5

Safety and Warranty

INTENDED USE OF THE MACHINE

The machine is designed for vacuum packaging of food or other products for 8 hours a day, 5 days a week. 

Any other or extended use is not in accordance with this purpose and the manufacturer accepts no liability for 

any resulting damage or injury. Only use this machine while in perfect technical condition in accordance with 

the above mentioned purpose.

Safety Measures

The machine is equipped with the following standard safety devices:

•  Short-circuit and overload safety.

•  Pump fan guards.

All safety devices must be correctly installed and may only be removed to accommodate maintenance and 

repair activities by trained and authorized service personnel. The machine may never be operated while safety 

measures are incomplete, deactivated or absent. The safety devices may never be by-passed.

RESIDENTIAL USERS: vendor assumes no liability for parts or labor coverage for component failure 

or other damages resulting from installation in non-commercial or residential applications. The right 

is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as 

possible.

1 YEAR PARTS AND LABOR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized 

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not 

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of 

without difficulty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated 

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Содержание VP-NL-0004-SN

















































Отзывы: