Omcan VP-CN-0600, Инструкция по эксплуатации

Страница: 12 / 16

12
Troubleshooting
Uneven sealing veins, air bubble or not firm sealing, the reasons are as follows:
• Sealing rubber bar is unclean.
• Heating time is too short or temperature is too low.
• Sealing can’t be pressed tightly caused by insufficient bulge of gas bag.
• Air bubble shrinks caused by insufficient cooling time.
• Heating sealing bar is damaged and the surface is not flat.
Parts Breakdown
Model VP-CN-0600
43632
Item No. Description Position Item No. Description Position Item No. Description Position
AC294 Working Transformer for 43632 1 AC300 Vacuum Pump for 43632 7 AC306 Assemble Sealing Bar for 43632 13
AC295 Sealing Transformer for 43632 2 AC301 Filter for 43632 8 AC307 Sealing Tape for 43632 14
AC296 Contactor for 43632 3 AC302 Control Panel for 43632 9 AC308 Sealing Fabric (10m/Roll) for 43632 15
AC297 Relay Cards for 43632 4 AC303 Lid Gasket for 43632 10 AC309 PP Plate for 43632 16
AC298 Assemble Valve for 43632 5 AC304 Gas Bag for 43632 11 AC310 Air Switch for 43632 17
AC299 Lid Switch for 43632 6 AC305 Sealing Gasket for 43632 12 AC311 Gas Flushing Valve for 43632 18