9
Operation
4.
Refrigerant LED: During refrigeration, the LED is on; when the cold room temp. is constant, the LED is off;
During the delay start, the LED flashes.
5. Defrost LED: during defrosting, the LED is on; when it stops defrosting, the LED is off, during the delay
display of defrost, the LED flashes.
6. Digital controller reset.
When display shows “Disorder”, press the DOWN button for 2s until the buzzer rings, quickly press the UP
button for 6s until the buzzer rings again, the display will flash for 3s and it restores factory settings.
Maintenance
1.
Notice.
Keeping the refrigerator clean and periodical maintenance is necessary. Always unplug from the socket
before maintenance. Never use if the plug is damaged or is loose in the socket to prevent from electric
shock or short circuit. Never spray the refrigerator. Never use alkali detergent, soap, gasoline, acetone or
brush.
2.
Clean outside.
Dip a soft cloth in neutral detergent (tableware detergent) to clean the outside of the refrigerator and then
wipe it with dry soft cloth.
3.
Clean inside.
Take the rack out for cleaning with water. Use a soft cloth to wipe the box.
4. Shutting down the refrigerator for a long time.
Take all food out and unplug from the wall socket. Clean both inside and outside of the refrigerator
thoroughly and open the door to allow for sufficient drying. The glass breaks easily. Keep the glass far from
children.
5.
Replacement of lamp in the light box.
If the LED lamp is damaged, it must be replaced by the manufacturer, or its service agent.
Troubleshooting
Problem
Cause and Remedy
No refrigeration.
Is the plug fully in the socket?
Is the fuse broken?
Is there no power in the outlet?
Содержание RS-CN-0252-5
Страница 11: ...11 Parts Breakdown Model RS CN 0252 5 47424...
Страница 12: ...12 Parts Breakdown Model RS CN 0252 5 47424...
Страница 14: ...14 Electrical Schematics Model RS CN 0252 5 47424...