8
Installation
1. Remove the screws on the wooden boards with a screw driver or electric screw driver.
CAUTION! Glass shelves are packaged separately. Be careful of the glass doors on the back of the
equipment!
2.
Remove the wooden boards, and carefully remove the glass shelves from equipment.
3.
Remove equipment from the pallet.
4.
Remove the protective foam and packaging film from the outside of the equipment.
5.
Place equipment on a flat and level surface.
GLASS SHELVING
1.
Remove the two glass sliding doors on the back: lift upwards and remove the bottom of the glass doors
first. The remainder of the door will slide out easily.
2. Remove the tape from the bottom panel in the cabinet.
3. Open the glass package which has a shelf glass and the windshield.
Caution! Handle the glass packaging carefully. Grasp firmly and carefully remove.
4. Place the shelf glass in the brackets.
Caution! Make sure that the glass is intact before placing the glass onto the brackets.
5. Place the windshield on the front of cabinet. Check that all glass is in proper position before placing any
product in the cabinet.
6. Install the back sliding door.
BAFFLES: AMBIENT VS. REFRIGERATED CONDITIONS
Top cabinet of equipment can be 100% ambient or 100% refrigerated or 50% ambient & 50% refrigerated. Two
kinds of different baffle are provided to facilitate desired condition.
• Four pieces of Solid baffle.
• Four pieces of Perforated baffle.
The baffle will prevent (or allow) refrigerated air from circulating through the display area and returning through
the air return grill.
1.
For 100% ambient (non-refrigerated) conditions, four pieces of solid baffle must be positioned in each one
cabinet to block air flow and air return grill.
2.
For 100% refrigerated conditions, four pieces of perforated baffle are positioned in each one cabinet to
allow air to circulate through display area and return through air return grill.
3.
For 50% refrigerated and 50% ambient condition, to switch from ambient to refrigerated condition, change
two pieces of solid baffle to perforated baffle in one of cabinet, and vice versa.
Note: To clean, remove baffle from cabinet, brush out crumbs or residue from baffle. Wipe down with
clean rag dipped in mild soap and water solution.