6
Operation
Technical Specifications
USE OF THE PASTA MACHINE (Fig. 2)
BEFORE USE and AFTER USE:
Follow the instructions described in the maintenance section.
1. Position the machine (
A
) on a flat stable surface which can bear the weight, fit the clamp (
D
) into the
opening (
G
), tighten the screw (
H
) until the machine is firmly locked to the table.
2. Fit the tray (
B
) to the machine body (
A
) matching the openings (
I
) to the catches (
L
) on the tray (
B
), push
gently downwards until the tray (
B
) and the machine body (
A
) are firmly locked.
3. The dough must be kept at room temperature.
4. After turning the knob (
M
) to position 10 place part of the prepared dough on the rollers (
O
). Press the
dough gently and insert the handle (
C
) in the hole (
N
) on the machine body, turn the handle clockwise
(causing the pasta rollers to turn). This will roll out the pasta, fold the pasta in half and pass it through the
rolls again. Repeat the operation until a flat sheet of pasta is obtained.
5. To reduce the thickness of the pasta sheet stop the machine and turn the regulator knob (
M
) to reduce the
distance between the pasta rollers. Pass the sheet repeatedly through the rollers until it is of the desired
thickness.
USING THE SIMPLEX CUTTING ACCESSORY (Fig. 3)
BEFORE USE and AFTER USE:
Follow the instructions described in the maintenance section prior to use.
1. Position the machine (
A
) on a flat stable surface which can bear the weight, fit the clamp (
D
) into the
opening (
G
), tighten the screw (
H
) until the machine is firmly locked to the table.
2. Fit the tray (
B
) to the machine body (
A
) matching the openings (
I
) to the catches (
L
) on the tray (
B
), push
gently downwards until the hopper (
B
) and the machine body (
B
) are firmly locked.
3. Fit the cutting accessory (
F
) to the machine body (
A
) matching the openings (
I1
) to the catches (
R
) on the
accessory, push gently downwards to lock the accessory (
F
) and the machine body (
A
).
4. Insert the handle (
E
) in the hole (
P
) on the accessory.
5. Fit the tray pushing one end between the cutters (
Q
), turn the handle (
E
) clockwise to cut the pasta sheet.
Model
PM-IT-0210-M
PM-IT-0210
Roller Length
8.25” / 209.55mm
Max. Roller Opening
0.4” / 9.5 mm
Electrical
--------
110V/60/1
Weight
22 lbs. / 10 kgs.
35.5 lbs. / 16.1 kgs.
Machine Dimensions
8.5” x 12.75” x 9.75”
215.9 x 323.85 x 247.65mm
8.5” x 14” x 10”
215.9 x 355.6 x 254mm
Item Number
13231
13232
