7
Maintenance
1. Installing the batteries
• Place your fingers on the two tabs on the sides of the timer and firmly depress and pulling towards you,
the timer is released from the unit, then open battery box cover, install batteries in, then slide battery cover
back into the position.
• Check timer to ensure power is supplied by pressing “-”.
• Insert timer into the port until side tabs lock into place.
2. Programming the timer
Note: The timer will not automatically shut off your unit. Once your programmed time has lapsed, the
unit will beep 5 times and the screen will go blank.
Program manually
To manually program the timer, hold both “-” and “+” at the same time for four seconds. The timer will beep
twice. After the second beep, use the “-” and “+” to scroll to your desired time setting up to 19:59.
For fast scroll, hold the button down until you have reached your desired time setting. The timer will
automatically program the setting after five seconds. Now that you have programmed your time, you may press
the “-” button any time to start the timer. Once programmed, the timer will always default to the time setting
until otherwise changed.
Program using count-up mode
Your re-programmable timer allows you to program your time using count-up mode. This is convenient for
when you need to first measure the time required to grill your sandwich before programming. Once you have
started grilling, press the “+” button to start the timer. When you have finished grilling, press both “-” and “+” to
set the time. Once programmed, the timer will always default to this time setting until otherwise changed.
Note: When batteries are removed, the timer automatically defaults to the factory setting of 10
seconds.
Once the griddle is placed in a position by consulting International Standards and regulations. Cleaning the
cast iron plate is thoroughly advised.
Warm up the cast iron plate for 10 minutes until all smoke and/or odor has dissipated.
Switch off and unplug the unit, then use warm, soapy water to clean, followed by a rinse with warm water. Be
sure to always wash the grill plates after each use to remove any residue that may have accumulated.
For cleaning cast iron plate, please use warm soapy water while still warm. Do not use cold water on hot plate.
After cleaning, be sure the oil tray must be dry thoroughly before putting it back to the unit. Do not immerse
completely in water or any liquid to clean and the appliance should not be cleaned with a water jet.
Operation
