Omcan MS-IT-0330-N, Инструкция по эксплуатации

Страница: 6 / 28

6
Technical Specifications
Installation
The slicer must be mounted horizontally on a stable, robust and antiskid base adequate to support its weight.
The suggested height of the working table is of about 800 mm. It must be checked that the product holder is
not clamped and the product to be cut can be easily loaded.
WARNING: To prevent the risk of crushing hazard, locate the machine in a manner that allows a clear space
between the moving table and any permanent structure.
PRELIMINARY CLEANING
Before connecting the plug clean off the protective oil from the machine.
WARNING
The working table must always be cleaned.
ELECTRICAL SUPPLY
The machine must be installed in the proximity of a mains socket. Check that the power supply voltage
corresponds to that described on the information label and that it is connected to an adequate earth.
1. Connect the plug.
2. Check that the blade cover fastener handle is tight screwed.
3. Check that the blade sharpener is lowered and the protective cover is closed.
Model MS-IT-0330-N
Blade 13” / 330mm
Power 0.6 HP / 0.45 kW
Cheese Slicing
Slicing Volume
8 hours or more
Slicing Capacity 10.2” x 6.7” / 259 x 170mm | 9.25” / 235mm (Dia.)
Cut Thickness 0 - 0.55” / 0 -14mm
RPM 240
Electrical 120V / 60Hz / 1
Weight 130 lbs. / 59 kgs.
Packaging Weight 163 lbs. / 74 kgs.
Packaging Dimensions 36.2” x 33.8” x 32.7” / 920 x 859 x 831mm
Item Number 39477
*Results may vary due to product consistency and temperature