10
Operation
Maintenance
immediately.
WARNING! Before cleaning, assembling or disassembling the grinder, make sure the PLUG IS
REMOVED FROM THE OUTLET POWER SOURCE! ALWAYS unplug the grinder when not in use. After
unplugging the unit, turn power switch ON, then OFF to ensure that all power has been discharged
from the grinder.
CLEANING INSTRUCTIONS
IMPORTANT: BEFORE CLEANING MAKE SURE THE POWER IS TURNED OFF AND THE UNIT IS
UNPLUGGED.
Disassemble the grinder head and wash parts that come in contact with meat thoroughly in hot soapy water,
taking particular care to remove all grease and oil from surfaces. Rinse and dry all parts thoroughly before re-
assembling.
1. Wash all parts that have come in contact with meat in hot soapy water. BE SURE TO CLEAN
IMMEDIATELY AFTER USE. DO NOT IMMERSE THE MOTOR IN WATER OR OTHER LIQUIDS!
2. Rinse the grinder parts with clear hot water, and then dry them IMMEDIATELY.
3.
Fully lubricate the head, auger, plates and the knife with a food-grade silicone spray before and after each
use.
4. Clean the motor cover and gear housing with a damp towel and wipe dry. DO NOT IMMERSE THE
MOTOR IN WATER OR OTHER LIQUIDS!
IMPORTANT: Any metal parts must be coated with a food-safe silicone spray to prevent rusting; if not
properly protected; these parts will begin to rust very quickly. DO NOT use rusted parts.
Содержание MG-CN-0008-E
Страница 11: ...11 Figure Drawings 4 5 1 2 3 6 7...
Страница 12: ...12 Figure Drawings 10 11 9 8...
Страница 13: ...13 Parts Breakdown Model MG CN 0008 E 47777...
Страница 15: ...15 Electrical Schematics Model MG CN 0008 E 47777...
