Omcan JE-CN-0020, Инструкция по эксплуатации

Страница: 11 / 16

11
Troubleshooting
Mechanical failure. The motor output shaft end bevel
gear wheel transmission mesh.
Check whether the size of bevel
gear wheel is damaged.
Check whether the meshing
positions of the big and small
bevel gears wheel are correct, the
adjustable small bevel gears wheel
is rising to the correct meshing
position and tighten the hex screws
on the gear( when the small bevel
gear wheel on the motor shaft
position is moved down).
The damage of transmission
cylindrical gear.
The size of transmission cylindrical
gear is divided into a pair of large
cylindrical gear (Z = 52), a pair of
small cylindrical gear (Z = 39).
Iron gear is generally is tooth form
damage.
If the cylindrical gear transmission
has abnormal sound, it can be
judged that the cylindrical gear is
damaged, in the initial stage of the
gear damaged, the machine work
must be stopped immediately, the
damaged gear must be replaced,
otherwise it will affect the relative
position of the working parts of
machine, thus aggravates the
damage of the gear, and until
damage the electrical machine
and the working surface of the and
concave and convex balls.