background image

7

Safety and Warranty

This label indicates a flammable refrigerant “R290” used. There is a risk of fire.

WARNING AND SAFETY INSTRUCTION

This product cannot be used in outdoor environment.

This ice machine is not intended for use by children, and those with physical weakness, slow 

response, or mental disorders.

•  The installation, repair or maintenance of this ice machine must be carried out by professional and qualified 

personnel, or electric shock, fire, personal injury may cause from incorrect operation.

• 

After the ice machine is delivered, please keep the machine still upright for more than 24 hours, to have the 

lubricant be fully precipitated before startup, otherwise the compressor may be damaged.

• 

When handling, keep the cabinet upright, with the inclination not exceeding 45 degrees. Do not invert the 

machine or lay it horizontally.

• 

This ice machine should not be placed in wet or easily splashed area.

• 

The grounding of this ice machine cannot be connected to gas pipe, water pipe, telephone line or lightning 

rods, etc.

• 

There are rotating components in this ice machine. Do not insert slim objects into ventilation or exhaust 

ports, or serious mechanical injury may occur.

•  Do not store volatile or flammable substances in this ice machine, or it may result in explosion or fire.

• 

Do not store any sundries, or freeze any food in the ice bin. Keep the ice scoop clean.

•  The ice machine must be placed on the floor sufficient to supports its weight. Insufficient base may cause 

the equipment fall over and cause injury.

•  There should be sufficient ventilation space around the ice machine. Keep good ventilation.

•  Only the power supply specified on the machine nameplate can be used with this ice machine.

• 

This ice machine cannot be connected to hot water.

• 

Socket for this ice maker must be reliably grounded and with leakage protection.

• 

The ice machine must be disconnected from power before manual cleaning, repairing and maintenance.

• 

Before cleaning, repairing and maintenance, the remaining ice in the ice bin should be removed from the 

ice machine to avoid contamination to ice.

• 

Do not splash water directly onto the surface of the ice machine during the cleaning process; otherwise it 

may cause short circuit, leakage or other faults.

• 

Flammable foaming agent is used during the foaming process. The ice maker should be disposed of and 

recycled by qualified personnel and institutions.

• 

The ice machine should be properly managed to ensure that children will not play with the machine.

•  When the ice machine malfunctions, turn off the power and contact professional personnel for repairing

For the ice maker with flammable refrigerant R290:

•  DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. DO NOT USE 

Содержание IC-CN-0529

























Отзывы: