Omcan FW-CN-0066-C, Инструкция по эксплуатации

Страница: 7 / 16

7
Maintenance
Operation
Installation
• Before beginning with any cleaning or repairs make sure the device has been disconnected from the power
socket and has cooled down completely.
• Don’t use any acidic agents and make sure no water enters the device.
• To protected yourself from electric shock, never immerse the device, its cables or the plug in water or other
liquids.
• Don’t use any kind of pressure water jet for cleaning the device.
CLEANING
• The device should be cleaned regularly.
• Clean the device with a soft, damp cloth and a mild cleaning agent.
• Clean the shelves and the housing with a soft, damp cloth and a mild cleaning agent.
• Clean the water bowl regularly. Calcifications in the water bowl can be removed with common agents or
liquids.
• Only use a soft cloth and make sure you never use any kind of abrasive agents or pads which could
scratch the surface.
• After you have completed the cleaning procedure, you should use a soft and dry cloth to wipe dry and
polish the surface.
• Before first use, clean the inner sides and the shelves with a soft cloth and a mild cleaning agent.
Afterwards, dry the device thoroughly.
• Remove the water bowl from the device, fill the water bowl with water and reattach the water bowl to the
device.
• Connect the device to a single grounded power supply.
• Set the temperature as required for respective foods. You may adjust the desired temperature in the range
between 30°C - 85°C.
• The temperature inside of the hot display can be read from the front display.
• Put the foods in appropriate containers before placing them inside the hot display and shut it by using the
sliding door.
• Some of the device parts become very hot, always use safety gloves when placing or removing foods.
• Switch on the inner light when required using the light switch of the device.
• Disconnect the device from the power socket when the device is not in use.
• You must not position the device near open fireplaces, electric ovens or any other heat sources.
• Position the device in such a way that the plug is easily accessible.