7
Operation
Installation
THE FUNCTION OF THE PANEL
•
Your refrigerator has one control for regulating the temperature. The temperature control is located on the
lower right hand corner.
• The first time you turn the unit on, turn the temperature control knob in a clockwise direction to the
maximum setting “7” and run for at least 2 hours before putting frozen foods inside. This will ensure the
cabinet is thoroughly chilled before food is put in.
•
The range of the temperature control is from position “1” the warmest to “7” the coldest. should be correct
for home or office refrigerator use.
• To turn the refrigerator off, turn the temperature control to “0”.
•
Red light: Power on.
NOTE:
• Turning the temperature control to “0” position stops the cooling cycle but does not shut off the power to the
refrigerator.
• If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before restarting the unit. If
you attempt to restart before this time delay, the refrigerator will not start.
• Large amounts of food will lower the cooling efficiency of the appliance.
•
If you choose to change the thermostat setting, adjust thermostat control by one numerical increment at a
time. Allow several hours for temperature to stabilize between adjustments.
TEMPERATURE ADJUSTMENT/OPERATION
•
The appliance temperature can be adjusted by turning the thermostat on the Control Panel.
• The thermostat should be adjusted according to different environment temperature and the and the quantity
of food being stored by adjusting the knob of the thermostat. The knob rotates clockwise from “1” to “7”.
the appliance. This will give the refrigerant circuit time to settle and operate efficiently.
•
Install the appliance in a dry and well-ventilated place. The appliance is for use in places within the
temperature ranges defined according to the climatic class given on the Data Label located on the back of
the product. The appliance may not operate consistently.
•
If the appliance is installed next to another refrigerator or freezer, observe the minimum distance of 10cm to
avoid condensation.
•
The manufacturer is not responsible for failure to complete installation as described in this guide.
This appliance is intended for use in households but is not intended to be used in applications such as:
• Staff kitchen areas in shops, offices and other working environments.
• Farm houses and by clients in hotels, motels and other residential type environments.
•
Bed and breakfast type environments.
•
Catering and similar non-retail applications.
Содержание FR-CN-0255
Страница 11: ...11 Parts Breakdown Model FR CN 0255 44428...
Страница 12: ...12 Electrical Schematics Model FR CN 0255 44428...