![background image](http://html1.mh-extra.com/html/omcan/fr-cn-0160-s/fr-cn-0160-s_instruction-manual_4012318007.webp)
7
Installation
Operation
Maintenance
3. Insert the front glass panel into the front channel. Then, use the L-shaped brackets and the fasteners to
attach the front glass panel to each of the side panels. There are two bracket mounting locations on each
side; one at the top, and one at the bottom.
4. Install the gasket on the top edge of the front glass panel, and place top glass panel atop the front and side
panels.
5. Use the style of L-shaped brackets and fasteners referenced in Step 3 to attach the top glass panel to each
of the side glass panels. There are two bracket mounting locations on each side; one at the front, and one
at the back.
FOOD STORAGE
• Do not fill the freezer full of products. You should leave space between items and the inner surface of the
cabinet, so as to keep good ventilation of cold air and freeze evenly. Do not put in any bottled or canned
beverage with freezing point above the temperature in the cabinet when it is below zero.
•
For foods that should be moisture-free or lose water easily, wrap them up with hermetical food bags or
fresh films before putting in the cabinet for the sake of avoiding smell-mixing and reducing frosting.
• Storage of volatile and combustible gases, liquids such as strong alkalies, strong acids, petrol ,etc. is
forbidden.
•
Never put hot food directly in the freezer. Food should be cold or frozen before placing it inside.
•
The cabinet is intended exclusively for the storage and/or display of packaged foods only.
• The freezer should be cleaned regularly. When cleaning, turn off the power, take out the food in the cabinet,
clean the inside using water or a little neutral detergent.
•
Do not use boiling water, acid, chemical diluents, petrol and oil, or dirt-removing powder.
•
Dry it after cleaning.
•
Use light soap water when cleaning the door seal, apply a little of talcum powder on it after natural drying to
extend its service life.
•
Use soft cloth with water or a little detergent to clean the out surface. Note, keeping the power supply and
lower part of connect wires away from water to avoid electricity leakage.
•
Except common breakdowns, those who are not service technician should not take apart and repair the
freezer on their own so as to avoid worsening the trouble. Unauthorized repair of electrical part such as
compressor, temperature controller is forbidden.
DEFROSTING
• Defrost for better freezing efficiency when the frost film in the cabinet is 4-5mm thick.
• When defrosting, turn off the power, take out the frozen foods, open the door for warming and melting. Use
a soft cloth to absorb water and clean it up.
Содержание FR-CN-0160-S
Страница 10: ...10 Model FR CN 0160 S 44590 Parts Breakdown...
Страница 12: ...12 Model FR CN 0360 S 44588 Parts Breakdown...
Страница 14: ...14 Parts Breakdown Model FR CN 0460 S 44589...
Страница 16: ...16 Model FR CN 0160 S 44590 Model FR CN 0360 S 44588 Model FR CN 0460 S 44589 Electrical Schematics...