Omcan DI-CN-0024-X, Инструкция по эксплуатации

Страница: 8 / 16

8
Maintenance
Troubleshooting
• Turn off all function switches. Empty the bowl by operating the tap.
• Turn off the power switch and unplug from the socket.
• Fill with hot water to empty the bowls completely.
• Empty the bowl by operating the tap.
• Take off the handle assembly. All the parts must be washed carefully in clean water.
• Lift the front of the bowls until its release. Remove the back of the bowl until the bowl is complete off. Take
off the spiral beater and gasket of bowl.
• All parts must be cleaned with a mild dish washing liquid detergent and use clean water to rinse. Never use
abrasive agents.
• Lubricate gaskets with Vaseline before it is replaced.
• Spiral beater and bowl are placed. When the bowls is being replaced you must hear a click.
• From time to time provide to clean the condenser located inside the machine. Remove the side panels and
use a brush to stroke in the direction of the cooling fins. A clogged condenser prevents a good performance
of the machine.
Trouble Possible Causes Remedy
The machine does not run. Plug is not in position. Plug again.
Fuse is broken. Replace fuse.
The bowls rear side leak. Gasket improperly installed. Reinstall gasket.
Worn or nicked bowl gasket. Replace gasket.
Tap leak. Tap lever is not in its seat. Make the tap lever in its seat.
O-ring is not clean or worn. Clean and replace it.
Vibration and noise. The machine doesn’t be positioned
on a level stand.
Put the machine on a level stand.
The sugar content of the beverage
is less.
Increase the sugar content.