Omcan CE-CN-3500, Инструкция по эксплуатации

Страница: 7 / 12

7
Operation
Maintenance
once to access the timer function, the [Timer] indicator on the left of the key will light up. Display will show the
default time [120], user can press [+] or [–] key to set for the desired time; [+] key to set from 1 minute to 180
minutes by 1 minute increment and [–] to set from 180 minutes to 0 minutes by 10 decrement (press and hold
+ or - for 3 seconds to access quick adjustment by 10 minutes), the time can be adjusted from 1 minute to 180
minutes. After setting, user can press [Timer] key once to confirm or wait until the display stop flashing. After
the “Beep” signal, the appliance will stop the operation and change to standby mode automatically when the
end of the countdown. To cancel this function, user can either press the [On/Off] key to return to standby mode
or hold the [Timer] key to resume the desired power or temperature operation.
MAINTENANCE AND DAILY CARE
1. Remove the power plug from the socket prior to cleaning the unit. Do not clean it until the surface cools
down.
2. Glass plate, panel and the shell:
- Soft cloth for slight stain.
- For greasy, dirt, blot by using a clean damp cloth with neutral detergent.
3. While the radiator-fan working, dust and dirt would remain on the gas vent, please clean it by brush or cot-
ton stick regularly.
4. Remember do not washing the unit by water directly to avoid damaging.
5. To protect induction cooker, be sure to have a good contact between plug and socket before using.
6. Do not pull out the power cord directly during operation. To extend the appliance’s using life, press the “ON/
OFF” button first, then pull out the power cord.
7. In order to make operating time longer, the fan would still working for cooling the plate, is better to plug out
after the fan stops working.
8. Please pull out the power cord and put it away when not used for a long time.
9. Some models have structural design to against cockroaches, if needed, can put something like mothball to
expel the cockroaches.
Troubleshooting
Symptoms Problem Remedy
After connecting the power and
pressing the “power” key, the
appliance has no response.
Is the electricity in suspension? Use after resuming the electricity.
Is the fuse broken down? Check the root causes carefully.
If the problem cannot be fixed,
please contact Omcan for checking
and repairing.
Is the plug connected firmly?