6
Installation
Operation
The griddle should be placed on a firm leveled surface. If the unit is placed in close proximity to a wall,
partitions, kitchen furniture and decorative finish, it is recommended that they be made of non-combustible
material. If not, they should be clad with a suitable non-combustible heat-insulating material and fire prevention
should be installed.
Once the griddle is placed in a position by consulting International Standards and regulations. It is advisable to
clean the steel plate thoroughly. Warm up the cast iron plate for 3-5 minutes, turn off the thermostat, unplug the
unit, clean the unit using warm and soapy water. After cleaning, the griddle is ready to operate.
Turn on the unit to allow the cooking surface to warm up approximately for 20 minutes. Put the food on the
grilling plate, turn the thermostat dial to the required setting and cook. The general cooking temperature is
between 200°C and 220°C. Cooking temperature may vary due to the type of food being cooked. When not
cooking, turn the thermostat off.
If the griddle does not work, please check the following:
1. The power supply is correct and switched on.
2. The positions of switch and the thermostat are correct.
3. The elements are clear.
Technical Specifications
Model
CE-CN-1800-G
Power
1800 W
Temperature
60° - 300°C / 140° - 572°F
Cooking Area
14” x 16” / 356 x 406mm
Electrical
120V /60/1
Weight
44 lbs. / 20 kg.
Dimensions
14.25” x 21” x 8.5” / 362 x 533 x 216mm
Item Number
20179
