Omcan CE-CN-0004-N, Инструкция по эксплуатации

Страница: 8 / 16

8
Operation
Always ensure all parts are cleaned thoroughly before use. Detergents can be used to break down cooking
residue and ensure adequate cleaning.
TO OPEN DOOR
Door is magnetized. To open, grab door by grooves on left and right side of door (located on unit) and pull
down to open. Open the water refill. Make sure to fill to the maximum capacity (under the overflow drain holes.
There are no markings for this).
CAUTION: heating element must remain in a flat position. Water must completely cover the heating
element, at least to the MIN water level.
Plug in the socket, press switch into the ON position. The power switch will be illuminated and the element will
start heating. Turn the temperature control knob to the BOIL position. When the water is boiling, add the pasta
into the basket(s) and cook.
When cooking is completed, unit can be kept in the BOIL position or to the SIMMER setting to keep water
warmer for the next batch of food to be cooked. If not using again, turn temperature control knob to the MIN
setting and press the power switch to the OFF position. Unplug the unit from the power supply.
IMPORTANT: continually observe and maintain water level in the basin. Water level will decrease with
each boil. Refill with fresh water as needed.
1. DO NOT overload the pasta cooker with water or food product. Water will splatter, causing serious injuries
and burns.
Installation
BEFORE FIRST USE
CLEAN THE PASTA COOKER
1. Use a non-corrosive, grease-dissolving commercial cleaner to clean the protective metal oils from all
surface parts and the tank interior.
2. Follow the cleaner manufacturer’s directions.
CAUTION: be careful not to disturb the thermostat and high limit capillaries when cleaning down
inside the tank.
3. Rinse thoroughly and drain by opening the water outlet, accessible when the door panel is opened. You
may connect a hose (not supplied) to the water outlet (connection is NPT 1/2x12) or drain direct from the
valve. Open the water outlet and drain into a bucket or similar container.
4. Wipe tank completely dry with a soft, clean cloth.
5. Clean all pasta cooker accessories.
6. Rinse all parts thoroughly after cleaning.
7. Wipe dry.