Omcan CD-GR-1500, Инструкция по эксплуатации

Страница: 10 / 28

10
Maintenance
Operation
DAILY MAINTENANCE OPERATION.
• Turn the power switch off.
• Empty the wash tank by removing the overflow standpipe.
• Remove and clean the pump inlet filter and the four sediment filters.
• Rinse the washing compartment to remove any dirt residues.
• Reassemble the parts in reverse order.
The appliance should never operate without the pump filter in place.
HOW TO DRAIN THE MACHINE
1. Turn the power switch to drainage.
2. Remove the surface filters.
3. Remove the overflow pipe from the tank.
4. Leave the machine to drain by gravity.
detergent manually into the wash tank.) Close the door.
11. To start the washing program, select the program desired and close the door. The automatic program
commences, with the green program indicator light in the program selector switch changing from flashing to
steady.
Note: This unit is equipped with a “positive rinse temperature control and will not advance from
wash to rinse unless the rinse water is at the preset temperature (usually about 195°F / 91°C.)
12. When the program is finished, the green program light returns to flashing.
13. Promptly open the door and remove the basket with the clean items. Use caution with hot items.
14. Allow to dry.
If, after washing, there are stains from dirt or water spots, the cause may be one of the following:
• Wrong ratio of detergent to water.
• Rinsing water with very high mineral content.
• Improper quantity of rinse-aid.
• Wrong arrangement of items in the basket.
• Low water pressure during rinsing.
• Low water temperature during washing.
• Clogged or miss-positioned filters.
• Clogged jets.
Note
• The wash temperature must be within ≥ 74°C & ≤ 84°C and the rinse temperature must be within ≥ 74°C &
≤ 91°C.
• Please check during the operation that the rinse water pressure is within its limits (20 ± 5 psi).