Omcan BS-VE-3200-S, Инструкция по эксплуатации

Страница: 5 / 24

5
Safety and Warranty
• NEVER connect the power source with wet hands or wet clothes.
• ALWAYS ground the machine properly.
• NEVER touch the blade even when it is not in use because its edge is very sharp, it can cause serious
cuttings.
• NEVER adjust the cutting regulator (optional) with the blade in motion.
• NEVER use clothes with loosen sleeves specially near the wrist during the cutting operation.
• USE steel gloves during the cutting operation.
• NEVER switch on the machine with one of its doors opened.
• NEVER spray water or other liquid substances directly at motor, power switch or any other electrical
components.
• KEEP your working area clean and dry to prevent it from becoming slippery.
• ALWAYS install equipment in working area with adequate light and space away from CHILDREN and
visitors.
• NEVER operate without all warning labels attached and owner/operator manual available to operator.
• NEVER leave unattended while operating.
• STOP the machine immediately if you hear abnormal noises, of fear that injuries may occur.
• CONTACT your Distributor if you have any problems with the installation and operation of this machine.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!