Omcan BE-IT-0015A, Инструкция по эксплуатации, Страница: 8 / 40

8
Installation
Operation
PLACING MACHINE OUT OF SERVICE
Switch off the machine by bringing the main switch to 0-OFF and subsequently protecting the machine from
external factors and leave it in a dry and enclosed location.
DESCRIPTION OF THE COMMAND KEYPAD - AUTOMATIC UNITS
a. Start Button.
b. Emergency.
c. Digital display.
d. Knob to change the programs and the working times.
WORK PROGRAM SELECTION
To select the program to work with, keep the knob pressed for 3 seconds (the display highlights relating to
the program); turn the knob to the right or left to increase or decrease the program number. Once the work
program is chosen, confirm by pressing the knob once.
CHANGING THE WORKING TIMES
To change the working times, keep knob pressed for 3 seconds (the program number is highlighted). Select the
program number, keep the knob to change the individual working times pressed for another 3 seconds with the
procedure described below.
T 1 (PRESSING TIME)
The relevant display is highlighted. Turn the knob to the right or left to increase or decrease the value. Once
the desired value is set, press the knob once.
T 2 (ROUNDING TIME)
The relevant display is highlighted. Turn the knob to the right or left to increase or decrease the value. Once
the desired value is set, press the knob once.